
I received my new injectors, fuel tank, axles, housing ends, seals and front brakes. I decided I had to see what the brakes looked like.
Here is the box and the presentation, I guess it is the least Brembo can do for what they charge for these things.





Here they are installed, I still have to get the Maximum Motorsport line adapter on the passenger side but otherwise they are good to go!






I received my 3" flowmaster tips last week. I hadn't posted pics yet as I have only been mocking it up and modifying it to clear the panhard bar. I can't get too far until I get mufflers and flow tubes and of course the reared in.
Here is the progress pics.




Here are some pics of the Glenn's Performance 2003 Cobra tank modified internally and modified to work in the fox body.




Inside the tank baffling






The 03 tank has a smaller inlet and uses a different fill tube. Glenn's Performance includes a new rubber grommet, adapter with hose and a note that tells you to cut off 6" from the factory filler neck.
Here are some pics of the set up.





Factory neck


Modified neck


Mock up of the tank, still waiting for the new fuel hat from Fore Innovations

Tightened up the new AGR steering rack, it is valved to 2000R specs


That's all for now. Gotta work on some other stuff