93 Cobra Wheel Paint Code Number

1971Cobra · Post by **1971Cobra** » Tue Jun 27, 2006 6:26 pm

Dose anyone know the paint code number for the factory cobra wheels
and if that is a powder coat paint?

Post by **BADBOY** » Tue Jun 27, 2006 10:31 pm

Did you try a search at www.svtperformance.com ?

This was discussed there before.

Post by **1993cobra** » Wed Jun 28, 2006 7:14 am

Here is the thread from SVTperformance.com
http://www.svtperformance.com/forums/sh ... wheel+code

User: 93cobra#2771 replied " to use PPG Paint code DBC 33896

Post by **BADBOY** » Wed Jun 28, 2006 7:30 am

Good job Kevin !

I had to many things going on to do it for him.

QWKSNKE · Post by **QWKSNKE** » Wed Jul 12, 2006 11:11 am

1993cobra wrote:Here is the thread from SVTperformance.com
http://www.svtperformance.com/forums/sh ... wheel+code

User: 93cobra#2771 replied " to use PPG Paint code DBC 33896

yeah I discovered that code in 2000. Works very well

Black306 · Post by **Black306** » Fri Aug 18, 2006 8:07 pm

I just had my rims redone with that code. I had them stripped (they were chromed) and a friend of mine did the paint work. I had them clear coated because my friend said that the paint code is a base color and is designed to be covered with another layer (IE clear, pearl, etc.) As-is, the base color would be susceptible to discoloration from cleaners/tire dressing.

http://wcfords.com/ubb/attachment.php?postid=310025

http://wcfords.com/ubb/attachment.php?postid=310026

stangsteve1993 · Post by **stangsteve1993** » Fri Aug 18, 2006 9:27 pm

Latemodel Resto sell the paint in a rattle can. Pretty hard stuff to use though, most of the time it spits and sputters. I always have to shake the heck out of it, and set it in a sink full of hot water for about 5 minutes, shake it p and let it sit some more. the color is almost a dead match, but a 13 year old wheel wont look like a freshly painted wheel. Im about to redo mine.

Cobra4683 · Post by **Cobra4683** » Sat Aug 19, 2006 8:17 am

Looks good! Let us see it when you get them on the car. I would like to see them with the caps and tire to get a true feel for the color. I have seen several that were grayer that stock after refinished. But it sure seem like that is the code that gives them that whitish shiny glow in the right light.

Black306 · Post by **Black306** » Tue Aug 22, 2006 1:02 am

Cobra4683 wrote:Looks good! Let us see it when you get them on the car. I would like to see them with the caps and tire to get a true feel for the color. I have seen several that were grayer that stock after refinished. But it sure seem like that is the code that gives them that whitish shiny glow in the right light.

I haven't installed the caps because the ones I have are chromed, not machined finish. I'm going to order machined caps tomorrow.

http://wcfords.com/ubb/attachment.php?postid=310234

http://wcfords.com/ubb/attachment.php?postid=310235