plugs for supercharger?

COBRAJR707 · Post by **COBRAJR707** » Thu Sep 03, 2015 6:58 am

Hey guys, which plugs should i be running with my V3 vortech si supercharger? pushing about 10 lbs of boost.

Dixie789456 · Post by **Dixie789456** » Thu Sep 03, 2015 1:14 pm

Off topic, but how was the install? Bout to order the same kit for my cobra.

Z282SLO · Post by **Z282SLO** » Thu Sep 03, 2015 3:13 pm

I'm using Autolite plugs with a V2 at 10 lbs.

COBRAJR707 · Post by **COBRAJR707** » Thu Sep 03, 2015 6:19 pm

Dixie789456 wrote:Off topic, but how was the install? Bout to order the same kit for my cobra.

Not bad, worst part for me was making the hole larger for the power pipe.

COBRAJR707 · Post by **COBRAJR707** » Thu Sep 03, 2015 6:20 pm

Z282SLO wrote:I'm using Autolite plugs with a V2 at 10 lbs.

Which autolites did you go with? Did you go 1 heat range colder?

Ysi91 · Post by **Ysi91** » Fri Sep 04, 2015 12:16 am

NGK -8 here with s-trim @ 15lbs.

bdecoy · Post by **bdecoy** » Fri Sep 04, 2015 3:42 pm

Ysi91 wrote:NGK -8 here with s-trim @ 15lbs.

X2 NGK double prong all day!

Z282SLO · Post by **Z282SLO** » Sat Sep 05, 2015 2:39 pm

COBRAJR707 wrote:Which autolites did you go with? Did you go 1 heat range colder?

Autolite 764 copper core plugs with Taylor 409 Pro Race wires. Not sure about the heat range. Speed shop did the plugs & wires.

svtfamily619 · Post by **svtfamily619** » Sat Sep 05, 2015 5:03 pm

does vortech still make a bolt on
kit for 93 cobras?

Z282SLO · Post by **Z282SLO** » Sun Sep 06, 2015 8:35 am

svtfamily619 wrote:does vortech still make a bolt on
kit for 93 cobras?

Yes. There's a V3 setup (and probably others) for the 93 Cobra.

ssuro11 · Post by **ssuro11** » Mon Sep 07, 2015 10:26 pm

Any tips for rebuilding the engine for a supercharger? Looking at going with a vortech around 10lbs on my 93. I am about to order the fuel pump and replace all of the fuel tank. Would a 255 be enough or do I need a 340?

Z282SLO · Post by **Z282SLO** » Tue Sep 08, 2015 6:58 am

A 255 will work fine.

COBRAJR707 · Post by **COBRAJR707** » Wed Sep 09, 2015 2:22 pm

ssuro11 wrote:Any tips for rebuilding the engine for a supercharger? Looking at going with a vortech around 10lbs on my 93. I am about to order the fuel pump and replace all of the fuel tank. Would a 255 be enough or do I need a 340?

I went with a 340lph, 60# injectors and 80mm maf. Make sure you have MLS head gaskets.

Z282SLO · Post by **Z282SLO** » Wed Sep 09, 2015 3:16 pm

^^^
More than u need at 10lbs IMO. I'm using a 255 with 42lb injectors and a 80mm MAF at 10lbs.

Ysi91 · Post by **Ysi91** » Wed Sep 09, 2015 5:24 pm

I went with a 340lph, 60# injectors and 80mm maf. Make sure you have MLS head gaskets.[/quote

340lph with 60's here too

plugs for supercharger?

plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?

Re: plugs for supercharger?