89 Saleen SSC #168 10k miles
90 Saleen Vert #93 26k miles
92 Cobra Prototype 8k miles
93 Cobra #3032 Teal/gray cloth 6k miles
93 Cobra #3620 Black/Gray leather 12k miles
93 Cobra #4993 Teal/Gray Leather
93 Yellow SE 5spd, 4k miles
93 5.0 coupe 19k miles
94 GT 7k miles
92 25th 1LE Z28 900 miles
89 Saleen SSC #168 10k miles
90 Saleen Vert #93 26k miles
92 Cobra Prototype 8k miles
93 Cobra #3032 Teal/gray cloth 6k miles
93 Cobra #3620 Black/Gray leather 12k miles
93 Cobra #4993 Teal/Gray Leather
93 Yellow SE 5spd, 4k miles
93 5.0 coupe 19k miles
94 GT 7k miles
92 25th 1LE Z28 900 miles
Ah, that issue. I've seen it on a few cars. I've always just used the Tar and Bug remover. Takes the stuff right off. I can't say I've ever seen it that bad on any of the other colors.
My Teal car had the same issue and it would re-appear every 6 months or so. Seemed to be worse when it was hot out, which in Houston was 11.5 mos out of the year. lol
I read somewhere that the adhesive "wicks" its way out through the pores in the rubber molding. Not sure how true that is, but it sounds like solid BS to me!
I started using Zaino Z-CS Clear-Seal on those moldings and it seemed to work very well.