Page 1 of 1
Map-pocket fix for first timers
Posted: Thu Oct 24, 2013 8:51 am
by Romo93
I couldn't find anything when searching and I remember someone on here did a nice write up on the process of tightening up the map-pockets.
Can someone give me the basics? Mine are sagging a bit and I want to tighten them up. Or copy and paste the old thread into here.
Re: Map-pocket fix for first timers
Posted: Thu Oct 24, 2013 11:28 am
by SPEEDFREEK
You will have to take the door panels off and then remove the map pockets. on the back you will see how the elastic comes thru and staples to the board I just removed the staples and tighten up the elastic unless it needs the whole pocket replaced. But if it is just sagging a little and not torn it should tighten up nicely.
Re: Map-pocket fix for first timers
Posted: Thu Oct 24, 2013 12:04 pm
by Romo93
Sounds easy enough, Thanks!!
Re: Map-pocket fix for first timers
Posted: Thu Oct 24, 2013 1:20 pm
by Z282SLO
Romo93 wrote:Sounds easy enough, Thanks!!
Don't jinx yourself there, Romo! It's those "easy" projects that can be quite a headache sometimes.
Re: Map-pocket fix for first timers
Posted: Thu Oct 24, 2013 2:03 pm
by Romo93
Z282SLO wrote:Romo93 wrote:Sounds easy enough, Thanks!!
Don't jinx yourself there, Romo! It's those "easy" projects that can be quite a headache sometimes.
Exactly! I can see it now:
Take door skin off, fix map-pockets and all the plastic fasteners break from being 20 years old and it turns into a shopping list to fix....
Re: Map-pocket fix for first timers
Posted: Fri Oct 25, 2013 12:03 am
by WillyB93
Romo93 wrote:Z282SLO wrote:Romo93 wrote:Sounds easy enough, Thanks!!
Don't jinx yourself there, Romo! It's those "easy" projects that can be quite a headache sometimes.
Exactly! I can see it now:
Take door skin off, fix map-pockets and all the plastic fasteners break from being 20 years old and it turns into a shopping list to fix....
The plastic push pins are cheap, might just plan on replacing a few before you even tear it apart.
They will look like these:
http://www.google.com/imgres?imgurl=htt ... CEIQ9QEwCQ
Re: Map-pocket fix for first timers
Posted: Fri Oct 25, 2013 7:15 am
by Romo93
The plastic push pins are cheap, might just plan on replacing a few before you even tear it apart.
They will look like these:
http://www.google.com/imgres?imgurl=htt ... CEIQ9QEwCQ[/quote]
Thanks WB! I will go ahead and order some before I take the skins off.
Re: Map-pocket fix for first timers
Posted: Fri Oct 25, 2013 8:19 am
by WillyB93
You can get them at.local parts stores, or some.of.my.local.paint shops sell them.also.
Re: Map-pocket fix for first timers
Posted: Fri Oct 25, 2013 8:26 am
by psucobra
If Im not mistaken, I think the back of the door panel is made of masonite where the push pins mount. if your don't have a door panel tool or pull to hard on the panel, the head of the push pin could come through the masonite. Thats about the worst thing that could happen on this project.
