Page 1 of 1
Fuel injector testing
Posted: Sun Sep 28, 2014 11:44 am
by oldernu
I have a set of noids for various cars but the injector harness doesn't match up to the ford TBI noid. Im new to testing injectors what do you guys recommend. Using another noid ? Please advise and thanks. I had to tow the Teal Sparkler home cause it will crank but wont start. Getting fuel to the rails and spark just cranks and nothing. Im getting tired of missing all the events because of problems.
Re: Fuel injector testing
Posted: Sun Sep 28, 2014 1:00 pm
by oldernu
Opps pre mature.. I just used the Bosch light and Im getting no pulse at the injectors. Onward hunting the problem.. Any suggestions kindly appreciated Oldernu
Re: Fuel injector testing
Posted: Sun Sep 28, 2014 1:51 pm
by 1993cobra
could be the pick up in the distributor, have you done anything recently before it quit? i had one that had a wire backed out of the ecm connector , but i had the ecm out before . so check all connections , especially any you have had apart, then id say try another distributor , did you check to see if it is getting spark also?
Re: Fuel injector testing
Posted: Sun Nov 16, 2014 8:04 am
by oldernu
It was the computer. Sent it out for rebuild and all was well.. Tks for the comments fellas oldernu