93 cobra rear bumper support

hsean · Post by **hsean** » Thu May 12, 2011 4:28 pm

i need the measurements for the piece attached to the bumper.i am good with a welder and want to make my own thanks

hsean · Post by **hsean** » Thu May 12, 2011 6:37 pm

no one here can help me out?

Post by **BrettT** » Thu May 12, 2011 8:14 pm

<--18" in length-->
____________________________________
|___________________________________/
|__________________________________/ 3inch in width a bend in
|_________________________________/ middle to keep form of
|________________________________/ bumper cover.
The shape of the bracket. Looks like this dumn picture I tried to make. LOL.

Do you need to know where the mounting holes are.
Along the top of the bracket (to the bumper )..the mount holes are are located at 2" and slotted hole at 17"

Hope this helps. Not the best it making a diagram.
Let me know if you need more detail. I could probably take a pic on evening for ya.

Post by **1993cobra** » Thu May 12, 2011 8:27 pm

hsean wrote:no one here can help me out?

WOW! , a whole 2 hours passed before you got tired of waiting for a reply?

Thanks for helping him out Brett!

Post by **BrettT** » Thu May 12, 2011 8:33 pm

1993cobra wrote:
hsean wrote:no one here can help me out?
WOW! , a whole 2 hours passed before you got tired of waiting for a reply?

Thanks for helping him out Brett!

NO prob! Thanks, as you can see. Nothing on TV tonight. I really don't know what I was trying to do or get across there.

hsean · Post by **hsean** » Thu May 12, 2011 9:34 pm

thanks brett i appreciate it

hsean · Post by **hsean** » Thu May 12, 2011 9:42 pm

when you get a chance would love to see a pic but i kind of get an idea with the diagram

buddha · Post by **buddha** » Thu May 12, 2011 10:02 pm

1993cobra wrote:
hsean wrote:no one here can help me out?
WOW! , a whole 2 hours passed before you got tired of waiting for a reply?

Thanks for helping him out Brett!

LOL! What he said.

hsean · Post by **hsean** » Thu May 12, 2011 10:06 pm

1993cobra wrote:
hsean wrote:no one here can help me out?
WOW! , a whole 2 hours passed before you got tired of waiting for a reply?

Thanks for helping him out Brett!

i was thinking of getting started on it today and wanted to grab my friends welder.just alittle anxious i guess

Post by **BrettT** » Thu May 12, 2011 10:12 pm

hsean wrote:when you get a chance would love to see a pic but i kind of get an idea with the diagram

Hey, found a pictures for ya. Not the best. May help. The angle part is the furthest away in the pic. Closer to the tail pipe. You can see the bend in the metal close the bumper brace.

http://forums.corral.net/photopost/show ... user=37979

hsean · Post by **hsean** » Thu May 12, 2011 10:51 pm

yeah i can kind of see what your talking about there with the bend so its just plastic push pins being used to secure it on the bottom.i think the one on the end is missing in that pic.thanks for all your help

hsean · Post by **hsean** » Sun May 15, 2011 10:04 pm

i welded up the brackets today i put the bumper on and measured and then removed the bumper and welded.thanks again for the measurements brett.