93 cobra exhaust

[SPEEDFREEK]

One other thing, are you sure the 92 Cobra convertible with the Super Sound System is not real?

It is isnt it? I've saw it all over the web.

[93Cobra#2771]

Apology accepted. Poking fun and sarcasm are hard to read on the web.

And yes, I'm sure the 92 cobra vert wasn't a factory produced car.

Speed you crack me up.

[escogt]

Poking fun and sarcasm are hard to read on the web.

And yes, I'm sure the 92 cobra vert wasn't a factory produced car.

Speed you crack me up.

X3 on all 3 accounts... lol

[dustin9187]

sooooo would an aftermarket exhaust designed for an LX fit on a Cobra? just have to lengthen the hangers?

[SPEEDFREEK]

sooooo would an aftermarket exhaust designed for an LX fit on a Cobra? just have to lengthen the hangers?

Yes That is what I have always done.

[93Cobra#2771]

I used a longer piece of rubber hanger. Either than lengthening metal hangers. About double the length iirc.

[Z282SLO]

sooooo would an aftermarket exhaust designed for an LX fit on a Cobra? just have to lengthen the hangers?

Dustin, there are many different aftermarket exhaust options available for the LX. When you say "aftermarket exhaust" are you referring to tailpipes only or mufflers and pipes or h-pipe, mufflers and pipes?

Yes That is what I have always done.

Speed, does your answer apply to tailpipes only or to any of the above scenarios?


I'm guessing that if you leave the stock cats, H-pipe and mufflers in place on a Cobra, you can install aftermarket tailpipes designed for an LX by lengthening the hangers. However, I know from experience that some aftermarket exhaust components designed for an LX are not direct fits on a Cobra and installing tailpipes designed for an LX on a Cobra in that situation will require more than just lengthening the hangers.

[dustin9187]

sorry, i was talking about a cat-back system, like this...

http://www.americanmuscle.com/flowmaste ... 793lx.html

[SPEEDFREEK]

sooooo would an aftermarket exhaust designed for an LX fit on a Cobra? just have to lengthen the hangers?

Dustin, there are many different aftermarket exhaust options available for the LX. When you say "aftermarket exhaust" are you referring to tailpipes only or mufflers and pipes or h-pipe, mufflers and pipes?

Yes That is what I have always done.

Speed, does your answer apply to tailpipes only or to any of the above scenarios?


I'm guessing that if you leave the stock cats, H-pipe and mufflers in place on a Cobra, you can install aftermarket tailpipes designed for an LX by lengthening the hangers. However, I know from experience that some aftermarket exhaust components designed for an LX are not direct fits on a Cobra and installing tailpipes designed for an LX on a Cobra in that situation will require more than just lengthening the hangers.

I was speaking in general. I have never had a problem with any aftermarket exhaust I've put on a Cobra other than the hanger. Whether it be just a cat back or an entire system. I've used Mac, Flowmaster, Dynamax, Borla, to name a few and never any fitment issues other than the hanger. I use to know a part # for a hanger that autozone sells in the help section that was the exact length needed but with old age comes forgetfulness lol.