WTB: 93 cobra crank pulley

Parts for sale or wanted specifically for the 1993 Mustang Cobra only.

Moderators: SVT4942, SPEEDFREEK, 1993cobra, WillyB93

Post Reply
boost addict
Posts: 33
Joined: Tue Jun 19, 2007 8:30 pm

WTB: 93 cobra crank pulley

Post by boost addict »

Part number F3ZZ-6A312-A

Just got scammed on ebay with a stock 5.0 pulley.

e-mail at: strongtony97@yahoo.com

or call: 432-528-4104

Don't get on much so e-mail is better. Thanks in advance!

Tony
User avatar
1993cobra
Site Admin
Posts: 4537
Joined: Wed Dec 31, 1969 7:00 pm
Location: Texas of course!
Contact:

Post by 1993cobra »

ebay is a bad place to get the cobra pullies, unless you can see the part numbers in the pics. Because most people think the cobra uses the same pullies as non cobras, when they learne their wrong, they say" these came off my friends cobra" good luck . Also dont pay alot for the water pump pully because there are a lot of new ones left.
boost addict
Posts: 33
Joined: Tue Jun 19, 2007 8:30 pm

Post by boost addict »

Well, a gentleman off the corral tells me I may have the correct part number. Apparently, there is an updated part number F3ZE-6312-AA that is the same pulley. That's the one I got. $29 on ebay.

Is this true fellow cobra owners?
User avatar
1993cobra
Site Admin
Posts: 4537
Joined: Wed Dec 31, 1969 7:00 pm
Location: Texas of course!
Contact:

Post by 1993cobra »

the one i have in my desk is F3ZE-6312-AA ,
User avatar
aaronlstiles
Posts: 2744
Joined: Thu Mar 08, 2007 9:37 am
Location: Utah

Lower pulley

Post by aaronlstiles »

Yes they have 2 different part #'s for them, not sure if you all know, the 83/84 Mustang Gt also ran the smaller lower crank pulley, I have put one beside my 93 CObra lower and they are identicle but have a diferent part # If I remember I will get the # of the 83 Lower I have.
svtman
Posts: 21
Joined: Mon Mar 06, 2006 12:50 pm

Crank pulley

Post by svtman »

It should be the same part # just an E insted of an F
Black 93 with Grey Leather
Black 93 with Black Cloth
Black 93 with Grey Leather rebuild
Red 93 with Black Cloth rebuild
Red 93 with Grey Cloth
Red 93 with Grey Leather
Teal 93 with Grey Leather
Teal 93 with Grey Cloth
Teal 93 with 76K Was grey leather I saved this one from the crusher
User avatar
aaronlstiles
Posts: 2744
Joined: Thu Mar 08, 2007 9:37 am
Location: Utah

Crank pulley

Post by aaronlstiles »

Yes it is, I have 2 of them, Let me know if you still need one, I am keeping one for a spare.
KERNY D
Posts: 2
Joined: Fri May 16, 2008 1:20 pm

Post by KERNY D »

asperformance if you still have the crank pulley i would like to buy it off of you.I sent you a pm.Thanks.
User avatar
aaronlstiles
Posts: 2744
Joined: Thu Mar 08, 2007 9:37 am
Location: Utah

Pulley

Post by aaronlstiles »

Let me think about it I only have one spare one, I will try and round it up.
KERNY D
Posts: 2
Joined: Fri May 16, 2008 1:20 pm

Post by KERNY D »

sounds good.Please let me know when you round the pulley up.Thanks.
Post Reply