WTB: 93 cobra crank pulley
Moderators: SVT4942, SPEEDFREEK, 1993cobra, WillyB93
-
- Posts: 33
- Joined: Tue Jun 19, 2007 8:30 pm
WTB: 93 cobra crank pulley
Part number F3ZZ-6A312-A
Just got scammed on ebay with a stock 5.0 pulley.
e-mail at: strongtony97@yahoo.com
or call: 432-528-4104
Don't get on much so e-mail is better. Thanks in advance!
Tony
Just got scammed on ebay with a stock 5.0 pulley.
e-mail at: strongtony97@yahoo.com
or call: 432-528-4104
Don't get on much so e-mail is better. Thanks in advance!
Tony
- 1993cobra
- Site Admin
- Posts: 4537
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Texas of course!
- Contact:
ebay is a bad place to get the cobra pullies, unless you can see the part numbers in the pics. Because most people think the cobra uses the same pullies as non cobras, when they learne their wrong, they say" these came off my friends cobra" good luck . Also dont pay alot for the water pump pully because there are a lot of new ones left.
-
- Posts: 33
- Joined: Tue Jun 19, 2007 8:30 pm
- aaronlstiles
- Posts: 2744
- Joined: Thu Mar 08, 2007 9:37 am
- Location: Utah
Lower pulley
Yes they have 2 different part #'s for them, not sure if you all know, the 83/84 Mustang Gt also ran the smaller lower crank pulley, I have put one beside my 93 CObra lower and they are identicle but have a diferent part # If I remember I will get the # of the 83 Lower I have.
Crank pulley
It should be the same part # just an E insted of an F
Black 93 with Grey Leather
Black 93 with Black Cloth
Black 93 with Grey Leather rebuild
Red 93 with Black Cloth rebuild
Red 93 with Grey Cloth
Red 93 with Grey Leather
Teal 93 with Grey Leather
Teal 93 with Grey Cloth
Teal 93 with 76K Was grey leather I saved this one from the crusher
Black 93 with Black Cloth
Black 93 with Grey Leather rebuild
Red 93 with Black Cloth rebuild
Red 93 with Grey Cloth
Red 93 with Grey Leather
Teal 93 with Grey Leather
Teal 93 with Grey Cloth
Teal 93 with 76K Was grey leather I saved this one from the crusher
- aaronlstiles
- Posts: 2744
- Joined: Thu Mar 08, 2007 9:37 am
- Location: Utah
Crank pulley
Yes it is, I have 2 of them, Let me know if you still need one, I am keeping one for a spare.
- aaronlstiles
- Posts: 2744
- Joined: Thu Mar 08, 2007 9:37 am
- Location: Utah
Pulley
Let me think about it I only have one spare one, I will try and round it up.